107KW Underground Truck Industrial Hydraulic Oil Pumps 69.8ml/r

Industrial machinery underground truck hydraulic pumps reliable quality

Quick Detail:

· Cast iron housing

· Hydraulic components

· Model  PV22+MV23

· Hydraulic system power components

· Principle hydraulic transmission

· Features lifetime technical support

· Simple layout

· System Solutions

· Work fast

· Fully replace imported products

· Patent certificate certification

· Application industrial machinery underground truck hydraulic pumps 

· 1 year warranty

Description:

How to use the scraper?

(1) If the scraper is not in use, the soil and dust on it should be removed, and it should be parked on a relatively flat ground. Smoke and place the bucket on the ground, the bucket door is closed, and the unloading device is retracted to the back of the bucket , Turn off the engine, firmly support the mop with wooden blocks, use triangular wooden blocks to clamp the front and rear wheels, pull out the traction pins, move each joystick up and down several times to prevent fuel injection, disengage the quick connector, and use the cap Cover it well. If it is parked on uneven ground for a short time, use the bucket locking pin and hang the bucket on the cylinder of the gantry to prevent the bucket from being deformed.

(2) The scraper is suitable for earth work, not suitable for stone work. It can still work on a small amount of rock and soil, but if it encounters a slightly larger stone, wood, metal or obstacle when shoveling soil, it should stop immediately. Excluded. It is forbidden for the scraper to work in stagnant clay or in rainy weather. In the area exceeding the comprehensive slope limit, that is, when the longitudinal slope is > 10%, and the lateral slope > 18%, in order to avoid the scraper from dumping or a The side tires are too stressed, and the scraper is not allowed to work.

 PV22+MV23  Technical parameter:
 

Notices:

Hydraulic oil
The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.
As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.
Heat Exchanger
The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.
Application:
Mixer truck: concrete mixer truck, cement mixer truck;
Coal mining machinery: scraper;
Industry: pharmaceutical machinery;
Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers
 

FAQ:
 

Q1. Can I have a sample order for industrial machinery underground truck hydraulic pumps easy to use?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

10 to 15 days for samples, mass production according to MOQ

Q3. Do you have any MOQ limit for industrial machinery underground truck hydraulic pumps easy to use?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

Q5. How to proceed an order for industrial machinery underground truck hydraulic pumps easy to use ?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty to our products.

Q7: How to deal with the faulty?

Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation.